SoundCraft Vi1, User Manual

Page: 39 / 217

Soundcraft Vi1 ™ User Guide Issue 0810 Page 3 - 5
Channel Labels
By default the channels are labelled CH-1 to CH-32.
The Soundcraft Vi1™ uses long labels for the Screens and short labels for the LCDs. Long labels can con-
tain up to 10 characters, whereas short labels are restricted to 6 characters.
The Channel Label Page.
Changing The Channel Label
* Press the <INPUT> touch field to open the Input Page.
* Enter the channel label page by pressing {CH LABEL} on the Input Page.
* Type the long name (only valid characters are possible).
* Adjust the short name if necessary by touching the <Short Label> on the screen or by using
<TAB>.
* Leave the page with <ENTER>, or by pressing {CH LABEL} again.
<TAB> toggles the cursor between long and short fields.
NOTE: On the Vi1, the short label is not displayed anywhere on the control surface, but is used
to label some touchscreen buttons (e.g. in the user-defined fader page setup screens).