SoundCraft Vi1, User Manual

Page: 138 / 217

Soundcraft Vi1™ User Guide Issue 0810 Page 15 - 2
FRONT PANEL DISPLAY AND CONTROLS
The Cues of the currently-loaded show are displayed in the Cue List displayed on the upper right part of
the screen. The Show’s title is also displayed.
The Snapshot/Cue keys are used as described below.
SETUP
The [SETUP] key causes the Setup page to be displayed on the master screen, see page 15-4.
DATA Socket (on main panel)
This accepts a USB data storage device.
STORE
Pressing [STORE] will record the console’s current settings into a new cue.
UNDO
Pressing [UNDO] will undo the effect of pressing [RECALL], [NEXT] or [LAST]. It is useful if any of these 3
keys get pressed by mistake, and if the console’s previous settings, which will get overwritten, are needed
and have not yet been recorded into a cue.
PREV MODE
Press the [PREV MODE] key puts the encoder into Preview mode.
In this mode, cues can be recalled to the console surface, but without affecting any audio settings. See
page 15-15 for more details.
Cue List