B - 10
Imaging plate unit
B. Installation and setup
ii. Cabling not correct (link not active), and the
Unit
connection
animation appears on the unit
display. The unit is not physically connected to the
PC. Connect the unit to the PC.
iii. The PCs Ethernet connector(s) is faulty. There is
usually a green link LED near the PCs Ethernet
connector(s) on the NIC. If the LED is not on
replace the NIC.
PROBLEM
The unit display is not active but the power on / off
status light is on, green or yellow.
CAUSE / SOLUTION
•
Green LED - defective display or its cabling.
Replace
•
Yellow LED - unit is in standby (energy save)
mode.
