12
User’s manual 204253
Imaging plate unit
2. Intraoral imaging plate unit
3. Turn the protective cover and IP over so that the
black side of the protective cover is uppermost.
This makes it easier to slide the protective cover
and IP into the hygiene bag.
4. Slide the protective cover and IP into the hygiene
bag as far as they will go. Make sure that the
black side of the protective cover is on the same
side as the black side of the hygiene bag.
5. Peel off the cover paper from the sealing tape and
then fold the flap, along the pre-formed line, over
and onto the sealing tape.
6. Press and slide your thumb along the tape to
ensure that the flap is properly sealed.
7. Turn the sealed hygiene bag over and check that
the IP and protective cover are in the correct
position.
You must be able to see the light side of the
protective cover and the metal disk on the IP.
