C
h
ap
te
r 2
N
a
m
e
s
a
n
d
F
u
nc
ti
on
s
of
P
a
rt
s
17
2-3 LCD Panel
2-3 LCD Panel
a
Indicators on the back of the LCD panel
There are two indicators, as follows.
OPERATION indicator:
Lights when the on/standby
switch on the control panel is in the on (
"
) position.
ACCESS indicator:
Lights when the disc is being
accessed. If the on/standby switch is set to the
1
position while this indicator is lit, access to the disc is
completed before the unit switches to the standby
state.
Note
While the ACCESS indicator is lit, do not turn off the AC
power switch, disconnect the power cord, or remove the
battery. This could lead to a loss of data from the disc.
b
Video panel (color)
In recording, playback and editing operations, this shows
recording and playback video, thumbnails, and other
images. A status screen appears here when you press the
STATUS button
.
c
WARNING indicator
This lights when condensation within the PDW-R1, a laser
diode fault, or another hardware error is detected. It goes
off when the error state is cleared. When this indicator is
lit, the time data display and video panel show an error
message.
For details, see 8-3 “Error Messages” (page 121) and 8-
4 “Alarms” (page 122).
d
KEY INHI (key inhibit) indicator
This lights when the KEY INHI switch is set to on, with
either “MON./INPUT SEL” or “CONTROL PANEL” set
to “dis” in extended menu item 118 “KEY INHIBIT.”
AUDIO
VIDEO
INPUT SEL
WARNING
KEY INHI
REC INHI
INPUT CH
INPUT SEL
STATUS
CHARACTER
LIGHT
MONITOR
H
L
OFF
OFF ON
OFF ON
-30
dB
-12
-20
-40
-60
0
CH- 15
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH- 26
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH- 37
DATA
OVER
-30
dB
-12
-20
-40
-60
0
CH- 48
BATT
E
F
DATA
OVER
VITC
HOURS
MINUTES
SECONDS
FRAMES
COUNTER HOLD
VIUB
PB
EXT-LK
NDF
DISC
E
B
VITC
PROCESS
CONTROL
1
Indicators on the back of the LCD panel
3
WARNING indicator
3
Display settings section
1
2
Video panel (color)
4
KEY INHI indicator
5
REC INHI indicator
2
Audio and video settings section
OPERATION
ACCESS
ACCESS indicator
OPERATION indicator
