3-11
PDW-HD1500/V1 (E)
The system information of MIB-2 can be set on the SNMP page of the Maintenance menu.
The information is defined by the system group of MIB-2, and the setting contents are referred to from the SNMP manager.
The setting contents are used for system control, and will not affect the operations of XDCAM.
When monitoring the network consisting of multiple units of XDCAM or multiple devices with MIB-2 installed, individual
devices can be identified based on this information.
Item
Setting
Function
sysDescr
Display only
Displays the model name
sysObject
Display only
Displays the object identifier
sysContact
ASCII character only
*
1
In general, sets the information such as device manager or contact
(ex. Phone numbers, e-mail addresses, etc.)
sysName
ASCII character only
*
1
In general, sets the device name (ex: “XDCAM-002”, etc.)
sysLocation
ASCII character only
*
1
In general, sets the location where the device is installed (ex. “Studio-A”, etc.)
Status
ASCII character only
*
1
OK: Displayed when the data is saved correctly.
n
When “NG” is displayed, check the entered characters.
*
1
.
Up to 32 characters can be entered for each item.
.
sysContact, sysName, sysLocation can be set from the SNMP manager as well. Up to 32 characters can be entered in this case, too.
.
Chinese characters cannot be entered.
Procedure
1. Set the MIB-2 system information. (sysContact, sysName, sysLocation)
2. Save the setting by pressing “Execute”.
Check that “OK” is displayed in the Status field.
n
The setting is enabled after the power is turned on again.
To disable the setting, press “Reset”.
Summary of Contents for XDCAM PDW-HD1500
