Sony XDCAM PDW-HD1500, Maintenance Manual

Page: 55 / 160

3-9
PDW-HD1500/V1 (E)
3-4-2. SNMP
You can perform settings related to SNMP Agent of the SNMP function on the SNMP page of the Maintenance menu.
Item Setting Function
Community Read-Only public Sets the reading community name
*
1
Name Community Used when reading the MIB stored in XDCAM.
Read-Write — Sets the reading-writing community name *
1
Community Used when reading or writing the MIB stored in XDCAM
This needs to be set when writing the variables
(sysContact,sysName,sysLocation) of MIB-2 of XDCAM from the SNMP manager
Trap Community public Sets the community name of the trap issued from XDCAM
*
1
Communication — — Sets the SNMP Manager with which to communicate using SNMP
Hosts none : Rejects communication from all SNMP managers
Set this when not using SNMP
any : Accepts communication from all SNMP managers
specific : Accepts communication only from the SNMP manager with the specified
IP address
IP Address — Specifies the IP address of the SNMP manager with which to communicate when
1/2/3 “specific” is selected. Up to three IP addresses can be specified
Trap Hosts — — Specifies the destination of the trap sent from XDCAM
Hosts none : Does not send the trap
specific : Specifies the SNMP manager to which to send the trap
n
When using SONY-PRO-MIB, select “specific” and specify the IP address of
the SNMP manager
IP Address — Specifies the IP address of the SNMP manager to which to send the trap when
1/2/3 “specific” is selected. Up to three IP addresses can be selected
Authentication on Sets whether or not to issue an authentication trap when there is an access from
Trap a wrong community
on : Issues an authentication error trap
off : Does not issues an authentication error trap
Normally, set this to “on”
Status Display only OK, OK : Reboot the machine :
Displayed when the data is saved correctly
n
When “NG” is displayed, check the entered characters
*
1: Single-byte alphanumeric characters only. Up to 16 characters can be entered.