Sony XCU-CG160, Technical Manual

Page: 37 / 45

37
GainDigitalGreen
*3
RW Digital gain for the green channel. 24
GainDigitalBlue
*3
RW Digital gain for the blue channel. 24
GainAuto RW Sets automatic gain control (AGC) mode. 15
GainAutoLevel RW Sets the target level for Gain Auto and Exposure Auto mode. 15
GainAutoSpeed RW Sets the automatic gain speed. 15
GainAutoLowerLimit RW Sets the lower limit for the gain auto control. 15
GainAutoUpperLimit RW Sets the upper limit for the gain auto control. 15
BlackLevel RW Controls the analog black level as an absolute physical value. –
BalanceWhiteAuto
*3
RW Controls the mode for automatic white balancing between
the color channels. 24
SpatialFilterEnable RW Activates the 3×3 spatial filter. 27
SpatialFilterValueSelector RW Selects which physical line (or pin) of the external device
connector to control. 27
SpatialFilterValue RW Controls the selected parameter for 3×3 spatial filter. 256
means ×1.0. 27
ColorTransformationEnable
*4
RW Activates the color transformation filter. 26
ColorTransformationValueSelector
*4
RW Selects which physical line (or pin) of the external device
connector to control. 26
ColorTransformationValue
*4
RW Controls the selected parameter for color transformation
filter. 256 means ×1.0. 26
LUTControl RO Category that includes LUT control features. –
LUTEnable RW Activates the selected LUT. 25
LUTFormat RW Selects which LUT format is controlled among the various
LUT formats. 25
BinarizationThreshold RW Controls the binarization threshold (12 bits). 25
LinearInterpolationIndex RW Selects the index point to build a linear interpolation LUT. 25
LinearInterpolationInValue RW Specifies the In value of the point selected by
LinearInterpolationIndex. 25
LinearInterpolationOutValue RW Specifies the Out value of the point selected by
LinearInterpolationIndex. 25
LinearInterpolationBuild WO Builds a linear interpolation LUT. 25
LUTIndex RW Controls the index (offset) of the coefficient to access in the
selected LUT. 25
LUTValue RW Returns the value at entry LUTIndex of the LUT selected by
LUTSelector. 25
LUTValueSave WO Saves the value of the LUT to flash memory. 26
DigitalIOControl RO Category that contains the digital input and output
control features. –
LineSelector RW Selects the physical line (or pin) of the external device
connector or the virtual line of the Transport Layer to
configure. 28
LineMode RW Controls if the physical line is used to input or output a
signal. 28
LineSource RW Selects which internal acquisition or I/O source signal to
output on the selected line. 28
LineInverter RW Controls the inversion of the signal of the selected input or
output line. 28
LineStatus RO Returns the current status of the selected input or output line. 28
Category ( ) / Sub category ( )
Feature
Read/
Write
*1
Description See
page
*1 RO: Read only, WO: Write only, RW: Read/Write
*2 Color cameras are RO.
*3 Target models: Color cameras
*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.
*5 Target camera mode: NORMAL