Sony XCU-CG160, Technical Manual

Page: 35 / 45

35
DeviceLinkThroughputLimit RW Limits the maximum bandwidth of the data that will be
streamed out by the device on the selected link. –
DeviceLinkConnectionCount RO Returns the number of physical connection of the device
used by a particular link. –
DeviceLinkCommandTimeout RO Indicates the command timeout of the specified link. –
DeviceStreamChannelCount RO Indicates the number of streaming channels supported by the
device. –
DeviceStreamChannelSelector RW Selects the stream channel to control. –
DeviceStreamChannelType RO Returns the type of the stream channel. –
DeviceStreamChannelLink RW Index of device’s link to use for streaming the specified
stream channel. –
DeviceStreamChannelEndianness RO Endianness of multi-byte pixel data for this stream. –
DeviceEventChannelCount RO Indicates the number of event channels supported by the
device. –
DeviceCharacterSet RO Character set used by the strings of the device’s bootstrap
registers. –
DeviceReset WO Resets the device to its power up state. 33
DeviceRegistersEndianness RO Endianness of the registers of the device. –
DeviceTemperature RO Device temperature in degrees Celsius (
°
C). 30
TimestampLatch WO Latches the current timestamp counter into
TimestampLatchValue. –
TimestampLatchValue RO Returns the latched value of the timestamp counter. –
FactoryDefault RW Restores all settings to the factory default. –
ImageFormatControl RO Category for image format control features. –
SensorWidth RO Effective width of the sensor (in pixels). –
SensorHeight RO Effective height of the sensor (in pixels). –
SensorUnitCellSizeH RO Horizontal pixel cell size. –
SensorUnitCellSizeV RO Vertical pixel cell size. –
WidthMax RO Maximum width of the image (in pixels). –
HeightMax RO Maximum height of the image (in pixels). –
Width RW Width of the image provided by the device (in pixels). 11
Height RW Height of the image provided by the device (in pixels). 11
OffsetX RW Horizontal offset from the origin to the region of interest (in
pixels). 11
OffsetY RW Vertical offset from the origin to the region of interest (in
pixels). 11
BinningHorizontal RW
*2
Number of horizontal photo-sensitive cells to combine
together. 11
BinningVertical RW
*2
Number of vertical photo-sensitive cells to combine together. 11
ReverseX RW Flip horizontally the image sent by the device. 15
ReverseY RW Flip vertically the image sent by the device. 15
PixelFormat RW Format of the pixels provided by the device. 14
PixelSize RO Total size in bits of a pixel of the image. –
TestPattern RW Selects the type of test pattern that is generated by the device
as the image source. 26
Category ( ) / Sub category ( )
Feature
Read/
Write
*1
Description See
page
*1 RO: Read only, WO: Write only, RW: Read/Write
*2 Color cameras are RO.
*3 Target models: Color cameras
*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.
*5 Target camera mode: NORMAL