Sony XCU-CG160, Technical Manual

Page: 40 / 45

40
TransportLayerControl RO Category that contains the transport layer control
features. –
PayloadSize RO Provides the number of bytes transferred for each image or
chunk on the stream channel. –
SonySpecificControl RO Category that contains the Sony specific control
features. –
CameraModeSelector RW Selects camera mode. 12
CameraModeCurrent RO Indicates the current camera mode. –
LEDMode RW Controls the LED light. 30
GainAutoArea RO Category that contains detection area control for auto gain
control and auto exposure feature. 15
GainAutoHighlight RW Performs highlight area for auto gain control and auto
exposure feature. 15
GainAutoAreaWidth RW Indicates the percentage of the width for automatic gain’s
detection area. 15
GainAutoAreaHeight RW Indicates the percentage of the height for automatic gain’s
detection area. 15
GainAutoAreaOffsetX RW Indicates the percentage of the offset-X for automatic gain’s
detection area. 15
GainAutoAreaOffsetY RW Indicates the percentage of the offset-Y for automatic gain’s
detection area. 15
BalanceWhiteAutoArea
*3
RO Category that contains detection area control for auto white
balance feature. 24
BalanceWhiteHighlight
*3
RW Performs highlight area for auto white balance control and
auto exposure feature. 24
BalanceWhiteAutoAreaWidth
*3
RW Indicates the percentage of the width for automatic white
balance’s detection area. 24
BalanceWhiteAutoAreaHeight
*3
RW Indicates the percentage of the height for automatic white
balance’s detection area. 24
BalanceWhiteAutoAreaOffsetX
*3
RW Indicates the percentage of the offset-X for automatic white
balance’s detection area. 24
BalanceWhiteAutoAreaOffsetY
*3
RW Indicates the percentage of the offset-Y for automatic white
balance’s detection area. 24
Defect RO Category that contains defect detection and correction
control features. 30
DefectThreshold
*5
RW Sets the threshold level for defect detection. 30
DefectDetectionMode
*5
RW Starts detection of defect pixels. 30
DefectDetectionResult
*5
RO Gets the result of defect pixel detection. 30
DefectPatternSave
*5
RW Saves the defect pixel coordinates in nonvolatile memory. 30
DefectPatternLoad RW Loads the defect pixel coordinates. 30
DefectCorrection RW Enables defect correction. 30
Shading RO Category that contains shading detection and correction
control features. 31
ShadingDetectColor
*3 *5
RW Specifies which color is used for shading detection. 31
ShadingDetectionMode
*5
RW Performs shading detection by selected mode. 31
ShadingPatternCheck
*5
WO Performs the current detected pattern. 31
ShadingPatternSelect RW Selects a shading pattern to load or save. 31
ShadingPatternSave
*5
RW Saves the detected pattern specified by ShadingPatternSelect
to the non-volatile memory of the device. 31
Category ( ) / Sub category ( )
Feature
Read/
Write
*1
Description See
page
*1 RO: Read only, WO: Write only, RW: Read/Write
*2 Color cameras are RO.
*3 Target models: Color cameras
*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.
*5 Target camera mode: NORMAL