Sony XCU-CG160, Technical Manual

Page: 15 / 45

15
Image Flip
Flips an image vertically and horizontally.
Reboot the unit to reflect the changes of the setting.
Gain
Manual gain
The manual gain can be finely set in 0.1 dB increments.
Although the configurable lower/upper limit values of
the gain are slightly different for each camera, the
configurable values for the GainAnalog parameter are
–1 dB or lower to +27 dB or higher.
The rage of the gain setting that guarantees image
quality is 0 dB to 18 dB.
Auto gain (AGC)
By setting auto gain, the gain is automatically adjusted
according to the imaging environment. AGC operates so
that the average level within a detection frame satisfies
the GainAutoLevel setting. The AGC detection frame is
set to the central region by default. The detection frame
can be displayed and the detection area can be changed.
Area gain
A separate digital gain can be set for up to 16 rectangular
areas.
If multiple rectangular areas are duplicated, the gain
value of the low-numbered area takes priority.
Feature Parameter Setting
ReverseX False (0) Off (no flip)
True (1) Flip horizontally
ReverseY False (0) Off (no flip)
True (1) Flip vertically
Feature Parameter Setting
GainAnalog –1 or lower to 0 to +27 or
higher Gain dB unit
Feature Parameter Setting
GainAuto Off (0) Manual gain
Once (1) One-push AGC
Continuous (2) Continuous AGC
GainAutoLevel 0 to 11264 to
16383 AGC target level
(14 bits)
GainAutoSpeed 1 to 192 to 256 AGC
convergence
speed
GainAutoUpperLimit –1 or lower to
+18 to +27 or
higher AGC upper limit
GainAutoLowerLimit –1 or lower to 0
to +27 or higher AGC lower limit
GainAutoHighlight False (0) AGC detection
frame is hidden
True (1) AGC detection
frame is
displayed
GainAutoAreaWidth 1 to 50 to 100 Horizontal size of
AGC detection
frame
GainAutoAreaHeight 1 to 50 to 100 Vertical size of
AGC detection
frame
GainAutoAreaOffsetX 0 to 25 to 99 Horizontal
position of AGC
detection frame
GainAutoAreaOffsetY 0 to 25 to 99 Vertical position
of AGC detection
frame
Feature Parameter Setting
AreaGainEnableAll False (0) Gain in all areas set to Off
True (1) Gain in all areas set to On
AreaGainSelect 0 to 15 Designates the number of
the area for which to
change parameters.
AreaGainEnable False (0) Gain of area specified by
AreaGainSelect set to Off
True (1) Gain of area specified by
AreaGainSelect set to On
AreaGainWidth 0 to 128 to
Width Horizontal size of area
*
AreaGainHeight 0 to 128 to
Height Vertical size of area
*
AreaGainOffsetX OffsetX to
128 to Width Horizontal position of
area
*
AreaGainOffsetY OffsetY to
128 to Height Vertical position of area
*
Feature Parameter Setting
GainAutoAreaOffsetX
G
ainA
u
to
Ar
eaO
ff
setY
GainAutoAreaWidth
G
a
inA
u
to
Ar
eaHeight
Detection frame area
Output image