Sony XCU-CG160, Technical Manual

Page: 39 / 45

39
EventTestData RO Category that contains all the data features related to the
event test generated using the TestEventGenerate command. –
EventTest RO Returns the unique identifier of the event test type of event
generated using the TestEventGenerate command. –
EventTestTimestamp RO Returns the timestamp of the event test event. –
UserSetControl RO Category that contains the User Set control
features. 33
UserSetSelector RW Selects the feature User Set to load. 33
UserSetLoad RW Loads the User Set specified by UserSetSelector to the
device and makes it active. 33
UserSetSave RW Saves the User Set specified by UserSetSelector to the non-
volatile memory of the device. 33
UserSetDefault RW Selects the feature User Set to load and make active by
default when the device is reset. 33
UsersetMemoryIndex RW Provides the index (offset) of the user-programmable
identifier to access in the UserMemory. –
UsersetMemoryValue RW Represents the value found at entry UserMemoryIndex. –
ChunkDataControl RO Category that contains the Chunk Data control
features. –
ChunkModeActive RW Activates the inclusion of chunk data in the payload of the
image. –
ChunkSelector RW Selects which chunk to enable or control. –
ChunkEnable RW Enables the inclusion of the selected chunk data in the
payload of the image. –
ChunkImage RO Returns the entire image data included in the payload. –
ChunkOffsetX RO Returns the OffsetX value of the image included in the
payload. –
ChunkOffsetY RO Returns the OffsetY value of the image included in the
payload. –
ChunkWidth RO Returns the Width value of the image included in the
payload. –
ChunkHeight RO Returns the Height value of the image included in the
payload. –
ChunkPixelFormat RO Returns the PixelFormat value of the image included in the
payload. –
ChunkTimestampLatchValue RO Returns the last timestamp latched with the TimestampLatch
command. –
ChunkExposureTime RO Returns the exposure time used to capture the image. –
ChunkGain RO Returns the analog gain used to capture the image. –
ChunkGainDigitalRed
*3
RO Returns the digital gain for the red channel used to capture
the image. –
ChunkGainDigitalGreen
*3
RO Returns the digital gain for the green channel used to capture
the image. –
ChunkGainDigitalBlue
*3
RO Returns the digital gain for the blue channel used to capture
the image. –
TestControl RO Category for Test Control features. –
TestPendingAck RW Tests the device’s pending acknowledge feature. –
TestEventGenerate RW Generates a test event. –
TriggerEventTest WO Generates the test event if the event channel is enabled.
(Alternate command of TestEventGenerate) –
Category ( ) / Sub category ( )
Feature
Read/
Write
*1
Description See
page
*1 RO: Read only, WO: Write only, RW: Read/Write
*2 Color cameras are RO.
*3 Target models: Color cameras
*4 Enabled when color camera is set to BGR8, YCbCr8, or YCbCr422_8.
*5 Target camera mode: NORMAL