Sony VPL-F530H, Service Manual

Page: 62 / 122

1-54 (E)
VPL-FH60
The ON/STANDBY indicator stays lit in red. The WARNING indicator blinks in red.
Error Number of blinking Details of the error content
Cover error 2 The filter has come off.
The top cover has come off.
Light source error 3 The light source does not light up normally.
Drop error 6 Dropping is detected.
Lens not attached error 8 The lens is not attached.
Installation angle error 9 The installation angle sensor does not operate normally.
When the installation angle is out of the usable range of this
unit
The ON/STANDBY indicator blinks in red. The WARNING indicator blinks in red.
(The indicators blink simultaneously.)
Error Number of blinking Details of the error content
Fan error 3 Any of the fans does not operate normally.
Wheel rotation error 4 The rotational speed of wheel has exceeded the allowable
range.
Luminance error 5 The luminance has exceeded the allowable range.
Assembling error 6 The connector of temperature sensor is disconnected.
Lens shift error 7 The time out of lens shift limit processing during startup has
occurred.
(Blinks in red.)
Blink simultaneously.
(Blinks in red.)
(Stays lit in red.) (Blinks in red.)