Sony VPL-F530H, Service Manual

Page: 67 / 122

2-1 (E)
VPL-FH60
Section 2
Adjustments
2-1. Notes on Servicing
Do not remove the lens when the set is lighting.
Otherwise, it may cause damage to eyes or skin.
2-2. Procedure When Replacing the Parts
t
For obtaining the data released for service, contact your local Sony Sales Office/Service Center.
2-2-1. Unit Assembly
When replacing the unit assembly, perform the following procedure.
1. Write the data released for service using Quick Access3. (Refer to Section 2-5-8.)
2. Check the white balance state, and perform the adjustment as required. (Refer to Section 2-3-3.)
2-2-2. Prism Block Assembly
When replacing the prism block assembly, perform the following procedure.
Group A
1. Perform the V COM adjustment. (Refer to Section 2-3-2.)
2. Write the prism data supplied with the prism block assembly using Quick Access3. (Refer to Section
2-5-6.)
3. Check the white balance state, and perform the adjustment as required. (Refer to Section 2-3-3.)
Group B
1. Execute “Function” → “Color Calibration” → “Reset” on the menu.
2. Perform the V COM adjustment. (Refer to Section 2-3-2.)
3. Write the prism data supplied with the prism block assembly using Quick Access3. (Refer to Section
2-5-6.)
4. Check the white balance state, and perform the adjustment as required. (Refer to Section 2-3-3.)