Sony VPL-F530H, Service Manual

Page: 76 / 122

2-10 (E)
VPL-FH60
USB memory connection
Preparation
1. Set the Standby Mode to “Standard” in the Connection/Power menu.
(Refer to Operating Instructions.)
2. Set the RS-232C Setting to “RS-232C” in the Connection/Power menu.
(Refer to Operating Instructions.)
3. Set the LAN Setting to “LAN Port” in the Connection/Power menu.
4. Install each application to PC.
5. Disconnect the power cord of this unit.
6. Connect this unit with PC by RS-232C or USB-RS-232C dual, referring to the “Connection” in this
section.
2-4-2. Procedure for Updating All CPUs Collectively
When updating all CPUs collectively, contact your local Sony Sales Office/Service Center.
Bottom side
Terminal cover
USB sheet
USB-A
USB memory