Sony VPL-F530H, Service Manual

Page: 69 / 122

2-3 (E)
VPL-FH60
2-3. Electrical Adjustment
2-3-1. Preparation
Required equipment
.
NTSC, PAL, SECAM component signal generator:
Tektronix TG2000
+
AVG1 (option module)
+
AWVG1 (option module) or equivalent
.
VG (programmable video signal generator):
ASTRODESIGN VG-828 or equivalent
.
Chroma meter:
KONICA MINOLTA CL-200 or equivalent
n
Allow the warm-up time of 10 minutes after the power is on before starting the V COM and white balance
adjustments.
How to enter the service mode
Main version checking method
1. Press the
[MENU]
button.
The menu appears.
2. Press the
[&]
button on the information screen.
When the system information is displayed: v1.40.0 or later
When the system information is not displayed: v1.31.0 or earlier
In the case that the main version is v1.31.0 or earlier
1. Press the
[MENU]
button.
The menu appears.
2. Set the Status to “On” in the Operation menu.
3. Press
the
[MENU]
button to close the MENU.
4. Press the buttons in the following order:
[ENTER]
→
[ENTER]
→
[&]
→
[ENTER]
The message “Do you want to enter the Service Mode?
[Yes] [No]
” appears.
Select
[Yes]
and press the
[ENTER]
button.
In the case that the main version is v1.40.0 or later
For details on how to enter the service mode, contact your local Sony Sales Office/Service Center.