Personal Audio System
SRS-X99
There is no sound, or the sound skips during playback
Make sure that the iPhone/iPad/iPod touch or computer with iTunes and the speaker are connected to the same SSID
of your wireless router.
The server is overloaded. Quit all unnecessary running software in the server.
Wireless signal condition is poor. Stop using your microwave oven, etc.
The communication speed of the Wi-Fi network may become slower for IEEE802.11n-compliant wireless
routers/access points if the security method is set to WEP or WPA/WPA2-PSK (TKIP). If the speed slows down,
change the security method to WPA/WPA2-PSK (AES). The encryption (security) scheme varies depending on the
device. For details, refer to the operating instructions of your router/access point.
If the sound is interrupted or noise is generated via a Wi-Fi connection, connect the speaker and wireless router via a
commercially-available LAN cable, instead of via Wi-Fi. If the quality does not improve, also connect the computer
and wireless router via a commercially-available LAN cable.
The super tweeter speaker on the top panel produces high frequencies that exceeds the human audible range. You
may hear no sound from the super tweeter. This is not a malfunction.
Related Topic
Checking the Wi-Fi signal strength (reception sensitivity)
Connection method 4: Connecting to a wired network
4-567-508-11(1)
Copyright 2015 Sony Corporation
Troubleshooting
332
