Sony SRS-X99 Help Manual Download Page 119

Page: 119 / 359

Personal Audio System

SRS-X99

Charging USB devices, such as smartphones

You can charge your smartphone via a USB connection to the speaker.

1. Connect a USB device such as a smartphone to the USB A port (

A) with a commercially-available USB cable

or the USB cable supplied with your USB device.

Charging of the USB device will start automatically.

Hint

If the speaker is connected to an AC outlet, the USB device will be charged, even if the speaker is turned off.

An iPhone/iPad/iPod or Walkman can be charged even while playing back music via the USB A port (

A).

Note

Do not use a smartphone charging dock; it may prevent charging.

Charging of all USB devices cannot be guaranteed.

In an extremely hot environment, charging of the connected USB device will stop.

If the speaker is switched to another mode by tapping one of the function buttons while charging, charging may be

stopped. In this case, disconnect the USB cable from the speaker and connect it again. Charging will resume.

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands