Sony SRS-X99 Help Manual Download Page 21

Page: 21 / 359

Personal Audio System

SRS-X99

Connecting a USB flash drive

You can connect a USB flash drive to the USB A port (

A) directly.

You can also use a commercially-available USB cable to connect a USB device.

Music stored in a USB flash drive can be played back using the supplied remote control, or with a smartphone/iPhone

that has SongPal installed.

You can play back high-resolution audio format files by connecting a USB flash drive of Hi-Speed USB standard or more,

to the USB A port (

A).

1. Connect a USB flash drive to the USB A port (

A).

Note

Do not disconnect a USB flash drive during operation. To prevent damage to data, stop playback, then turn off the

power of the speaker before disconnecting the USB flash drive.

Sony is not responsible for any loss or damage to data in a USB flash drive that is connected to the speaker.

Sony does not guarantee correct operation when a USB hub or USB extension cable is used.

Do not connect a USB flash memory to the USB B port (

B). Only connect a USB flash memory to the USB A

port (

A).

Summary of Contents for SRS-X99













































































































































































































































































































































Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands

Sony SRS-X99, Help Manual

Search results

Summary of Contents for SRS-X99

Reviews:

Related manuals for SRS-X99

Brands by name

Popular brands