network settings and all BLUETOOTH device registration (pairing) information are deleted.
3. Turn on the speaker.
The
(on/standby) indicator lights up in green, then the LINK indicator begins to flash. Wait about two minutes
until the LINK indicator flashes slowly (blinks once in three seconds).
4. Search for the speaker using the iPhone/iPad/iPod touch.
i. Select [Settings].
ii. Touch [SRS-X99] from the list.
5. Perform the Wi-Fi network settings on the iPhone/iPad/iPod touch.
Follow the instructions on the screen.
6. Check that the LINK indicator lights up in orange.
When the speaker is connected to the same Wi-Fi network as the iPhone/iPad/iPod touch, the LINK indicator lights
up in orange. It may take more than a minute for the LINK indicator to light up.
The connection is complete.
Note
This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from
step 2.
Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after
setting the Wi-Fi security.
When you connect the speaker to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby
function is turned on automatically.
255
