54
Detailed Menu Description
C
h
a
p
te
r 5
M
e
nu
It
em
s
ALT/
[F8]
PREROLL
Sets the preroll time. This can be set in 1 second increments.
To make the setting, press the ALT/
[F8]
buttons, use the cursor buttons or MULTI
CONTROL knob to set the value, and then press the ALT/
[F8]
buttons again.
0 to 5 sec to 30 sec
Unit
ALT/
[F9]
REC INHI
Sets record inhibit mode.
Off:
Enables recording.
All:
Setting record/delete/flag is inhibited for all SRMemory cards.
When “All” is set, the numbers of all slots is displayed in red on the right side of the
write-protect mark on the status bar.
Unit
ALT/
[F10]
REMOTE CONFIG
Makes advanced settings regarding Remote control.
Unit
[F1]
REMOTE SLOT
Sets association between Remote (9P) connectors and SRMemory card slots.
Selects the relevant slot when executing commands in a form not specifying a slot.
Slot1:
Associates slot M1.
Slot2:
Associates slot M2.
Slot3:
Associates slot M3.
Slot4:
Associates slot M4.
Unit
[F1]
9PIN 1
Sets REMOTE (9P) -1 association
Unit
[F2]
9PIN 2
Sets REMOTE (9P) -2 association
Unit
[F3]
9PIN 3
Sets REMOTE (9P) -3 association
Unit
[F4]
9PIN 4
Sets REMOTE (9P) -4 association
Unit
[F10]
EXIT
Returns to the original menu.
–
[F2]
REMOTE PROTCL
Selects the protocol to be used for each Remote (9P) connector.
VTR/Disk:
Sony VTR protocol and Sony Disk protocol
VDCP:
VDCP protocol
Odetics:
Odetics protocol
Unit
[F1]
9PIN 1
Sets REMOTE (9P) -1 protocol
Unit
[F2]
9PIN 2
Sets REMOTE (9P) -2 protocol
Unit
[F3]
9PIN 3
Sets REMOTE (9P) -3 protocol
Unit
[F4]
9PIN 4
Sets REMOTE (9P) -4 protocol
Unit
[F10]
EXIT
Returns to the original menu.
–
[F3]
REMOTE FILELIST Selects return information for file information sense commands made with each
Remote (9P) connector.
All:
All file information
Playable A:
Information on files playable in port A
Playable B:
Information on files playable in port B
Playable C:
Information on files playable in port C
Playable D:
Information on files playable in port D
Editable A:
Information on files that can be switched smoothly during playback in
port A.
Editable B:
Information on files that can be switched smoothly during playback in
port B.
Editable C:
Information on files that can be switched smoothly during playback in
port C.
Editable D:
Information on files that can be switched smoothly during playback in
port D.
Only ports running as output ports can be selected.
Unit
[F1]
9PIN 1
Sets REMOTE (9P) -1 return information
Unit
[F2]
9PIN 2
Sets REMOTE (9P) -2 return information
Unit
[F3]
9PIN 3
Sets REMOTE (9P) -3 return information
Unit
[F4]
9PIN 4
Sets REMOTE (9P) -4 return information
Unit
[F10]
EXIT
Returns to the original menu.
–
[F10]
EXIT
Returns to the original menu.
–
Button
Indication
Setting
Target
