33
Superimposing Character Information
Chapt
er
3
Set
ting Up t
he Memor
y
St
or
ag
e Unit
b
Drop frame mark of the time code reader
“.”: Drop frame mode
“:”: Non-drop frame mode
c
Drop frame mark of the time code generator
“.”: Drop frame mode
“:”: Non-drop frame mode
d
Field mark of the VITC data
“ ” (blank space): When displaying fields 1 and 3
“*”: When displaying fields 2 and 4
e
Port
Indicates the output port.
f
Operation mode
The contents are divided into blocks A and B as shown in
the following table.
Block A:
Operation mode
Block B:
Lock state or playback speed
To display an error/warning message
Set the ALT/
[F7]
-
[F6]
(WARNING) key in the TC menu
to On.
In the event that an error or warning message occurs when
the ALT/
[F7]
-
[F3]
(INFO SEL) key in the TC menu is set
to anything apart from “Time” and “T&Audio”, the
blinking warning/error count will be shown in the second
line.
For details on error messages, see “Error Messages”
(page 73). For details on warning messages, see
“Warning Messages” (page 75).
When error messages and warning messages occur
simultaneously, the number of error message occurrences
flashes twice, and then the number of warning message
occurrences flashes twice.
When a warning message is not being displayed, the
contents set with the ALT/
[F7]
–
[F3]
(INFO SEL) buttons
flash on the second line.
To display the file name
The file name is displayed in the line following the time
data (operation mode) when the ALT/
[F7]
-
[F5]
(SUB
STAT) key in the TC menu is set to “File”.
The storage information is displayed by the first two
characters. The above example is SLOT M2. The third
character is a colon.
The fourth to sixteenth characters display the file name.
If the file name exceeds 13 characters, the thirteenth
character is shown as “...” and the part of the name
following the thirteenth character is not displayed.
To display the remaining memory of the input
port
The remaining memory is displayed in the line following
the time data (operation mode) when the ALT/
[F7]
-
[F5]
(SUB STAT) key in the TC menu is set to “REMAIN”.
To display the audio level
The audio level is displayed in the second and third lines
following the time data when the ALT/
[F7]
-
[F3]
(INFO
SEL) key is set to “T&Audio”.
The numeric characters show the audio channels. Audio
levels from CH1 to CH8 are displayed in the second line.
Audio levels from CH9 to CH16 are displayed in the third
line.
Indication
Operation mode
Block A
Block B
STOP
Stop mode
PLAY
Playback mode (unlocked)
PLAY
LOCK
Playback mode (locked)
JOG
STILL
Still-picture jog mode
JOG
FWD
Forward jog
JOG
REV
Reverse jog
SHUTTLE
(Speed)
Shuttle mode
VAR
(Speed)
Variable mode
PORT
CLOSE
Port closed
The number of error/warning message occurrences
M 2 : T h i s I s S a m p l
...
B : S H U T T L E
S T I L L
e
T C R . 2 3 : 5 9 : 5 9 : 2 3 *
M 2 :
R 2 4 0 m i
B : S H U T T L E
S T I L L
n
T C R . 2 3 : 5 9 : 5 9 : 2 3 *
