Sony SRG-300SE, Service Manual

Page: 50 / 84

2-18 (E)
SRG-300SE/301SE
2-3-2. Confirmation of MIC Input
Procedure
1. Connect the devices as follows.
2. Turn on the power of this unit.
3. Wait until the image is output on the SDI monitor.
4. Change the IP address of this unit and PC according to Section 2-1-3.
5. Check the image by accessing this unit from PC according to Section 2-1-4.
6. Perform the following CGI command according to Section 2-1-5 to change the audio setting.
CGI
command: http://192.168.0.100/command/camera.cgi?AudioIn=on
CGI command: http://192.168.0.100/command/camera.cgi?MicLineSelect=mic
CGI command: http://192.168.0.100/command/camera.cgi?AudioInVolume=0
User name: Administrator user name (default: admin)
Password: Administrator password (default: admin)
7. Update the browser and make a sound in front of the microphone.
8. Check that the sound is output from PC and that the audio level meter of this unit extends.
PC This unit
SDI monitor
LAN cable BNC cable
Microphone
(connected to MIC terminal)
Audio level meter of this unit