Sony SRG-300SE, Service Manual

Page: 36 / 84

2-4 (E)
SRG-300SE/301SE
3. Click the
[Property]
button.
The Local Area Connection Properties screen is displayed.
4. Select “Internet protocol version 4 (TCP/IPv4)”, and then click the
[Properties]
button.
The Internet Protocol Version 4 (TCP/IPv4) Properties screen is displayed.
5. Set the IP address and subnet mask as follows.
IP
address: 192.168.0.**
Subnet mask: 255.255.255.0
n
In “**”, set the value other than the IP address of this unit in the range from 1 to 254. (Set the
address that does not conflict with other connected devices.)
6. Click the
[OK]
button.
7. Click the
[OK]
button on the property screen of the local area connection.
IP address and Subnet mask
Check the radio button.
[OK] button
[Properties] button
Internet Protocol Version 4 (TCP/IPv4)