Sony SRG-300SE, Service Manual

Page: 43 / 84

2-11 (E)
SRG-300SE/301SE
Writing of serial number
1. Click the
[START]
button.
The device is automatically connected to the this unit, and then the model information is displayed in
the Model Information box.
2. Confirm the model name (Model:) and MAC address (Mac:) in the Model Information box.
The MAC address should be the same as the MAC address label supplied with the SY-437 board.
3. Type the serial number of this unit and select the destination.
n
Select the destination according to the model.
SRG-300SE: WW
SRG-301SE: CN
n
Once you write the serial number and destination, you cannot change it. Be extremely careful in the
writing of serial number as well as the confirmation of model name and MAC address.
Model Information box
Serial number
[OK] button Destination