96
DMBK-R105 8CH Insertion board
1
ANALOG INSERTION connectors
1
ANALOG INSERTION connectors
Inputs/outputs unbalanced analog signals (0 dBu
standards).
Specifications
Connectors: 3-pole 6.3 standard jack, unbalanced
Pin assignment: Sleeve: GND, Chip: output/SEND,
Ring: input/RETURN
Reference input/output level: +0 dBu (load impedance
10 k
Ω
)
Maximum input/output level: +20 dBu (load
impedance 10 k
Ω
)
Output impedance: 150
Ω
Input impedance: 10 k
Ω
DMBK-R106 Interface Board for ADAT
Connects external devices such as ADAT interface
boards, or external devices such as tape recorders that
have an ADAT interface
1)
.
Note
This board does not function when the SIU-100/100T
is running at 88.2/96 kHz, or when the sampling
frequency of the input signal is 88.2/96 kHz.
.......................................................................................................................................................................................
1) ADAT is the registered trademark of the interface produced by ALESIS STUDIO ELECTRONICS, INC.
Specifications
Connector: Optical type
×
2
Locations and Functions of Parts and Controls
