— 5 —
SERVICE NOTE
1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1.
Pull out the power cord.
2.
Remove the top case.
3.
Prepare a hexagonal wrench or L-shaped stiff wire. (See Fig.1.1)
4.
Insert a hexagonal wrench (or hard wire) into a hole on the side of the DVD drive in the right angle. (See Fig. 1-1. and 1-2.)
Note:
If a hexagonal wrench (or hard wire) is not inserted in at the right angle, belt may be damaged.
5.
Press the rack to open the tray a little.
6.
Pull out the tray slowly and gently.
NOTES DURING THE FORCED EJECTION
1. If the forced ejection is executed while a blank disc media (DVD±RW, ±R) exists on the tray
• Insert a DVD-ROM (DVD test disc, DVD software available on the market, or the like) in the tray and then close the tray.
Note1:
If you close the tray while it is empty, ejection of the tray becomes impossible.
Note2:
If you close the tray with a CD disc inserted in it, the CD can be ejected. However, if you close the tray while it is empty, there can be a case that
ejection of the tray becomes impossible.
Note3:
Even if you replace the DVD drive unit while the tray remains under the state as described above, the situation cannot be improved.
2. If the tray cannot be ejected while the disc is not inserted
• Execute the forced ejection.
• Insert a DVD-ROM (DVD test disc, DVD software available on the market, or the like) on the tray and try to close the tray.
(There are cases that it recovers the trouble.)
3. Contents of forcedly ejected blank disc media (DVD±RW, ±R) can be damaged. (There can be a case that initialization is also impossible.)
Tray
Right way of pushing the wrench
Wrong way of pushing the wrench
Fig. 1-1
Fig. 1-2
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
