Password (1) / Password (2): Enter the password for the user name above. You can view the password by placing a
check mark in the [Show Password] checkbox.
Port: TCP port number used when connecting to Connection Control Manager from the camcorder.
If [TX Connection] items are changed, reconnect the camcorder after saving the settings.
XDCAM pocket Connection
Username (XPT): Enter the user name to use when logging in to the Connection Control Manager from XDCAM
pocket.
Password (XPT): Enter the password for the user name above. You can view the password by placing a check mark
in the [Show Password] checkbox.
Port: TCP port number used when connecting to Connection Control Manager from XDCAM pocket.
If [XDCAM pocket Connection] items are changed, reconnect XDCAM pocket after saving the settings.
RX Connection
Username: Enter the user name to use when logging in to the Connection Control Manager from a PWS-100RX1
streaming receiver.
Password: Enter the password for the user name above. You can view the password by placing a check mark in the
[Show Password] checkbox.
Port: TCP port number used when connecting to the Connection Control Manager from a PWS-100RX1 streaming
receiver.
If [RX Connection] items are changed, run the Initialization Tool on the PWS-100RX1 after saving the settings, then
reconnect.
[FTP]
Up to three FTP settings can be configured. Select the individual settings tabs and configure each item.
Enable FTP Server Setting: Set to on to use an FTP server.
FTP Server Name: Enter the FTP server name.
FTP Server Address: Specify the IP address or FQDN (for example, ftp.example.com) of the FTP server.
FTP Server Port: Enter the FTP server port. Specify “21” if using the FTP protocol.
Passive Mode: Specify whether to use passive mode for connections to the FTP server. Check with the administrator
of the FTP server.
Use FTPS: Specify whether to connect using FTPS.
FTPS Server CA Certificate: Displays the contents of the server CA certificate used for FTPS connections. Click the
[Browse] button, and select a .pem file. Configuration of this item is not required if not using FTPS connections.
Check CN and CRL: Specify whether to perform common name (CN) and certificate revocation list (CRL)
authentication when connecting via FTPS.
FTP Username: Enter the user name for connection to the FTP server.
FTP Password: Enter the user password for connection to the FTP server.
Upload Directory: Enter the full path of the upload destination directory on the FTP server (for example, /home/sony).
If a directory is not specified, the upload destination is the root folder.
Create Sub Directory: Placing a check mark in the [Use Transmitter Name] checkbox will create a sub directory with
the name of the transmitter as the upload destination directory for uploading files. If the checkbox is cleared and a
directory is specified in [Upload Directory], files will be uploaded to the specified directory. If the checkbox is cleared
and a directory is not specified in [Upload Directory], a sub directory is created with the date as the name in the root
directory, and files will be uploaded to that directory.
[Streaming]
Target Bit Rate Setting: Specify whether to enable manual setting of the target bit rate in the Settings area of the
Streaming screen. Placing a check mark in the checkbox enables you to select a [Target Bit Rate] value, depending
on the [Network Range] setting in the Settings area.
Use HEVC if available.: Place a check mark in the checkbox to use H.265/HEVC. This function is enabled on the
PWS-110RX1A only. A separate license is required to use this function. H.265/HEVC transmission is not performed if
H.265/HEVC is not supported by the transmitter device or if H.265/HEVC is not enabled on the transmitter device.
[Intercom]
To use the intercom function, link the camcorder with the PWS-100RX1 on the receiver side under [Receiver Audio Ch.].
17
