NETWORK RX STATION
PWS-100RX1 / PWS-110RX1 / PWS-110RX1A
Ver.1.11 or later
Structure of the Settings Screen
The Settings screen is used to configure the Connection Control Manager (CCM), the transmitting camcorders, and
receiving PWS-100RX1 units. You switch between pages using the tabs along the top of the screen.
[CCM] tab
Configures Connection Control Manager settings.
[System]
CCM Name: Enter the name of the Connection Control Manager.
Language: Select the display language of the Connection Control Manager.
Username (1): Enter the administrator user name to use when logging in to the Connection Control Manager.
Password (1): Enter the password for the user name above. You can view the password by placing a check mark in
the [Show Password] checkbox.
Username (2) / Username (3): Enter the general user names to use when logging in to the Connection Control
Manager. Two general users can be configured.
Password (2) / Password (3): Enter the password for the user name above. You can view the password by placing a
check mark in the [Show Password] checkbox.
Streaming Monitor: Grants streaming monitor privileges to users.
Streaming Operator: Grants streaming operator privileges to users.
File Transfer Operator: Grants file transfer operator privileges to users.
Administrator: Grants administrator privileges to users.
[Connection]
Configures settings for logging in to the Connection Control Manager from a transmitting/receiving device.
TX Connection
Username (1) / Username (2): Enter the user names to use when logging in to the Connection Control Manager from
a camcorder. Two users can be configured.
16
