Viewfinder Screen Display
33
Chapt
er
1
Ov
er
v
ie
w
m
DISPLAY switch
Turns the display of text information on and off.
ON:
Display text information.
OFF:
Do not display text information.
n
MIRROR switch
The image display on the monitor screen becomes
reversed horizontally or vertically when the
viewfinder barrel is raised up or rotated. Use this
switch to control the image display in such
situation.
L/R:
Reverse the image horizontally.
OFF:
Do not reverse the image.
B/T:
Reverse the image vertically.
o
Viewfinder cable
p
Microphone holder
The viewfinder screen displays not only the video
picture but also characters and messages
indicating the camcorder settings and operating
status, a center marker, a safety zone marker, etc.
When the menu screen is not displayed and the
DISPLAY switch is set to ON, the items for
which an ON setting was made with
OPERATION >Super Impose in the setup menu
or with related switches are displayed at the top
and bottom of the screen.
Caution messages are indicated for three seconds
when you carry out operations to change
camcorder settings. Adjustment execution
messages are indicated while adjustments
proceed. When adjustments are finished,
messages showing the results of adjustments
appear for three seconds.
Not only these indications are displayed on the
viewfinder screen, but a menu setting enables
them to be output as video signals.
All items that can be displayed on the viewfinder
screen are shown below.
Notes
• The units for the distance indicator on the screen can
be set to either meters or feet. The units can be changed
using OPERATION >Display On/Off >Length Unit in
the setup menu.
• The distance displayed on the screen should only be
used as a guide.
Top of viewfinder screen
Viewfinder Screen
Display
qd
qf qg
qh
qa
0
qs
Summary of Contents for PMW-TD300
Page 185: ......
