Sony PMW-TD300, Operating Instructions Manual

Page: 21 / 185

Locations and Functions of Parts and Controls 21
Chapt
er
1
Ov
er
v
ie
w
Lens Block (right side)
a
AUTO CONVERGENCE button
Press this button to set the convergence distance
to the current focus distance
(see page 62) .
b
CONVERGENCE dial
Turn this dial to adjust the convergence distance.
Turn the dial clockwise to move the convergence
point closer, and counterclockwise to move the
convergence point further away (factory default
setting).
You can set the direction of rotation of the dial
using OPERATION >Dial Operation >Conv.
Clockwise in the setup menu.
You can change the function assigned to the dial
using OPERATION >Lens Dial >Inner in the
setup menu.
c
FOCUS dial
Turn this dial to adjust the focus.
Turn the dial clockwise to focus on closer
subjects, and counterclockwise to focus on distant
subjects (factory default setting).
You can set the direction of rotation of the dial
using OPERATION >Dial Operation >Focus
Clockwise in the setup menu.
You can change the function assigned to the dial
using OPERATION >Lens Dial >Mid in the
setup menu.
d
ZOOM dial
Turn this dial to adjust the zoom.
Turn the dial counterclockwise to zoom out for
wide-angle shots, and clockwise to zoom in for
long-distance shots (factory default setting).
You can set the direction or rotation of the dial
using OPERATION >Dial Operation >Zoom
Clockwise in the setup menu.
You can change the function assigned to the dial
using OPERATION >Lens Dial >Outer in the
setup menu.
e
ASSIGN. (assignable) 6 switch
You can assign a function to this switch using
OPERATION >Assignable SW in the setup menu
(see
page 145 ). The grid function is assigned to
this switch by factory default setting.
f
VF DISPLAY SELECT switch
Switches the image displayed in the viewfinder.
L: Displays the left lens image, in color.
R: Displays the right lens image, in color.
L+R: Displays an overlay of the left lens image
and the right lens image, in color, by
calculating the average for each pixel.
L-R: Displays the image obtained by subtracting
the right lens image from the left lens image,
in color.
3D: Displays a 3D image, in color.
Anaglyph: Displays an anaglyph.
3D can be displayed in the supplied viewfinder
only.
Only the left or right image can be displayed in
DXF series viewfinders.
g
SHIFT button
Use this button in combination with other buttons.
h
IRIS dial
For manual iris adjustment, set the IRIS switch to
the MANU (manual) position, then turn this dial.
Turn the dial clockwise to open the iris aperture,
and counterclockwise to close the iris aperture
(factory default setting).
You can set the direction of rotation of the dial
using OPERATION >Dial Operation >Iris
Clockwise in the setup menu.
i
ND SELECT (ND filter) switch
Switches between four ND filters built into this
camcorder.