Setting the Date/Time of the Internal Clock / Preparing the Audio Input System
46
Cha
p
te
r 2
P
rep
ar
at
ions
You can set or change the date and time of the
internal clock. The date and time set are reflected
in the timecode.
For menu operations, see “Basic Setup Menu
Operations” (page 103).
1
Select MAINTENANCE >Clock Set
>Date/Time in the setup menu.
2
Press the MENU knob.
The Date/Time setting window appears.
3
Turn the MENU knob to display the
desired value, and press the knob.
The selection shifts to the next item on the
right.
4
To continue the remaining settings,
repeat step
3
.
5
Making sure that “SET” is selected,
press the MENU knob.
The internal clock is set with the date and
time set in steps
3
and
4
.
To cancel the setting
Before executing step
5
, push the MENU
CANCEL/PRST/ESCAPE switch up to the
CANCEL/PRST side.
Attach the supplied microphone to the
microphone holder of the supplied viewfinder.
1
Loosen the screw (
1
) and open the
microphone holder clamp (
2
).
2
Place the microphone in the
microphone holder.
1
Place the microphone in the holder so
that “UP” is at the top.
2
Close the microphone holder.
3
Tighten the screw.
3
Plug the microphone cable into the MIC
IN connector, then set the AUDIO IN
CH1/CH2/CH3/CH4 switch for the
Setting the Date/Time of
the Internal Clock
Preparing the Audio
Input System
Connecting a Microphone to the
MIC IN Connector
Microphone holder clamp
Summary of Contents for PMW-TD300
Page 185: ......
