Adjusting the Convergence
63
Chap
ter
3
Ad
jus
tme
nt
s
an
d Set
tings
The direction of rotation of the dial can be
changed using OPERATION >Dial Operation
>Conv. Clockwise in the setup menu.
The convergence function can also be assigned to
the ZOOM dial or FOCUS dial. The function
assigned to the dial can be changed using
OPERATION >Lens Dial >Outer or Mid in the
setup menu.
Press the AUTO CONVERGENCE button to set
the convergence distance to the current focus
distance.
You can also shift the convergence point so that it
is closer or further away than the focus point
using OPERATION >Auto Conv. >Adjust Point
in the setup menu.
You can record a convergence point distance in
an assignable switch. A convergence point
distance can be assigned to the following
assignable switches.
• ASSIGN. 1/3 switches
• ASSIGNABLE 4/5 switches
• COLOR TEMP. button
Select an assignable switch using OPERATION
>Assignable SW in the setup menu, and then
select Convergence to record the current
convergence point distance in the switch. To use,
press the assignable switch to set the convergence
point to the distance recorded in the switch.
Assigning different distances to several
assignable switches allows you to easily switch
between multiple convergence point distances
when shooting.
If you want to change a convergence point
distance assigned to an assignable switch, press
the assignable switch with the SHIFT button held
down. The convergence point distance at the
moment the switch is pressed will be recorded.
The convergence point can be locked so that the
convergence is not adjustable by pressing an
assignable switch that has the Convergence Lock
function assigned to it. When the convergence
point is locked, the following buttons and
switches cannot be operated.
• CONVERGENCE dial (with
CONVERGENCE function assignment)
• AUTO CONVERGENCE button
• Assignable switches with Conv. Near/Far
function or Convergence function assignment
To release the lock, press the assignable switch
with the Convergence Lock function again. The
lock status is retained even after the power is
switched off.
Adjusting using the AUTO
CONVERGENCE Button
Adjusting using the Assignable
Switches
Locking the Convergence Point
Summary of Contents for PMW-TD300
Page 185: ......
