Sony PDW-U4, Service Manual

Page: 101 / 156

98
4-11-5. LDR-35 Board
Preparation
1. Remove the front panel assembly. (Refer to “4-2-1. Front Panel Assembly”.)
2. Remove the rear panel. (Refer to “4-2-2. Rear Panel”.)
3. Remove the loader assembly. (Refer to “4-3. Loader Assembly”.)
Procedure
1. Remove the spring of the release lever, and then rotate the release lever in the direction of the arrow.
2. Remove the screw (M2 x 2.7), and then remove the LDR-35 board.
Note
When installing the LDR-35 board, fit the two bosses with the two holes.
3. Install the removed parts by reversing the steps of removal.
Special head
screw (M2 x 2.7)
Remove the spring.
LDR-35 board
Boss
Boss
Holes
Rotate the release lever.