1-4 (E)
NSS-S2
1-4. Power Supply
1-4-1. Information for Power Supply
A switching regulator is used for the power supply of this
unit. The voltage within the range of 100 V to 240 V can
be used without changing the supply voltage.
Power voltage
: AC 100 V to 240 V
Power frequency
: 50/60 Hz
Power consumption : 490 W (500 VA)
(continuous rating)
w
This unit has no AC power switch.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, or connect the power
cord to a socket-outlet which must be provided near the
unit and easily accessible, so that the user can turn off the
power in case a fault should occur.
2
1
AC inlet
2
1
AC inlet
AC inlet
2
1
1-4-2. Recommended Power Cord
Recommended parts
For customers in the U.S.A. and Canada:
1
Power cord 125 V 10 A (2.4 m):
!
1-551-812-31
2
Plug holder (Brown):
3-613-640-01
For customers in the United Kingdom:
1
Power cord 250 V 10 A (2.4 m):
!
1-551-631-61
2
Plug holder (Brown):
3-613-640-01
For customers in European countries except the
United Kingdom:
1
Power cord 250 V 10 A (2.4 m):
!
1-551-631-00
2
Plug holder (Brown):
3-613-640-01
If the unit is used in the area except above, please contact
your local Sony Sales Office/Service Center.
w
.
Use the specified power cord only.
.
Do not damage to the power cord.
c
.
Ground the unit safely.
.
Plug and connector of the power cord must be inserted
into the AC inlet as far as they can go.
Summary of Contents for NSS-S2
Page 6: ......
Page 8: ......
Page 38: ......
Page 40: ...Printed in Japan Sony Corporation 2006 12 16 2005 NSS S2 SY J E 3 903 855 02 ...