Sony NSS-S2, Installation Manual

Page: 25 / 40

1-17 (E)
NSS-S2
1-13. SNMP
NSS-S2 implements SNMP (Simple Network Management Protocol).
To monitor and manage NSS-S2 on a network with SNMP, set the followings.
Implemented SNMP specifications
The SNMP Agent of NSS-S2 supports followings:
SNMP version: SNMPv1
MIB definition: SMIv2
Support PDU:
GetRequest, GetNextRequest, SetRequest, GetResponse, Trap
Standard MIB: MIB-2
Extended MIB: SONY-PRO-MIB, PROV1-RAID-MIB, PROV1-NSS-S-MIB
Setting
Community Name: Default setting is “public”. ; Change is possible using the control panel menu.
TRAP IP Settings:
Default setting is “0.0.0.0”. ; Set up using the control panel menu.
n
For each MIB structure, get information and description of trap sent from NSS-S2 to SNMP Manager,
refer to the maintenance manual of NSS-S2.
1-13-1. Setting of Community Name
1. Display the CONFIGURATION menu screen. (Refer to Section 1-12-1.)
2. Display the “SNMP COMMUNITY” using
[UP]
or
[DOWN]
key.
3. Press
[ENTER]
key to enter a new community name.
4. Repeat the following steps (1) and (2) to enter a desired community name.
(1) Set a desired character using
[UP]
or
[DOWN]
key.
(2) Press
[RIGHT]
or
[LEFT]
key to move the cursor position.
5. Press
[ENTER]
key when the input is complete.
6. The check screen is displayed.
Set the cursor to OK using
[RIGHT]
or
[LEFT]
key and press
[ENTER]
key.
SNMP COMMUNITY
private
CHANGE
OK NG