Sony NSS-S2, Installation Manual, Page: 22 / 40

1-14 (E)
NSS-S2
1-12-2. Setting of Device Name
1. Display the CONFIGURATION menu screen. (Refer to Section 1-12-1.)
2. Display the “DEVICE NAME” using
[UP]
or
[DOWN]
key.
3. Press
[ENTER]
key to enter a new device name.
4. Repeat the following steps (1) and (2) to enter a desired device name.
m
.
Enter a device name within 16 characters.
.
A to Z and underscore ( _ ) are available for a device name.
(1) Select a desired character using
[UP]
or
[DOWN]
key.
(2) Press
[RIGHT]
or
[LEFT]
key to move the cursor position.
5. After selecting the last character, press
[ENTER]
key.
6. The check screen is displayed.
Set the cursor to OK using
[RIGHT]
or
[LEFT]
key and press
[ENTER]
key.
7. The device name is set and the display returns to the CONFIGURATION menu screen.
DEVICE NAME
CHANGE
OK NG