manualshive.com logo in svg

Sony NSS-S2, Installation Manual, Page: 7 / 40

Share
Download
Sony NSS-S2 Installation Manual Download Page 7

3 (E)

NSS-S2

Purpose of this manual

This manual is the installation manual of Media Storage Unit NSS-S2.
This manual is intended for use by trained system and service engineers, and
describes the information regarding installation.

Related manuals

Besides this Installation Manual, the following manuals are available for the
NSS-S2.

.....

NSS-S2 Operation Manual (supplied with the NSS-S2)

This manual describes the application and operation of the NSS-S2.
Part number: 3-903-843-XX

.....

NSS-S2 Maintenance Manual (available on request)

This manual describes the information that premise the service based on main
parts replacement (service overview, maintenance functions, replacement of the
parts and boards, circuit descriptions and block diagram, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
Part number: 9-968-191-XX

Contents

The following is a summary of all the section for understanding the contents of this
manual.

Section 1

Installation

Explains the operating conditions, installation space, power supply, rack mounting,
installing the HDD unit, connection, and checks after connection.

Section 2

Service Overview

Explains the cleaning procedure of the air filter, the function and factory setting of
the switches and LEDs on the board.

Trademark

Trademarks and registered trademarks used in this manual are follows.

.

Ethernet is a registered trademark of Xerox Corporation.

Manual Structure

Summary of Contents for NSS-S2









































Reviews:

No comments