Sony NSS-S2, Installation Manual, Page: 26 / 40

1-18 (E)
NSS-S2
1-13-2. Setting of TRAP IP
1. Display the CONFIGURATION menu screen. (Refer to Section 1-12-1.)
2. Display the “SNMP TRAP” using
[UP]
or
[DOWN]
key.
3. Press
[ENTER]
key to enter a new TRAP IP.
4. Repeat the following steps (1) and (2) to enter a desired TRAP IP address.
(1) Set a desired number using
[UP]
or
[DOWN]
key.
(2) Press
[RIGHT]
or
[LEFT]
key to move the cursor position.
5. Press
[ENTER]
key when the input is completed.
6. The check screen is displayed.
Set the cursor to OK using
[RIGHT]
or
[LEFT]
key and press
[ENTER]
key.
1-14. Setting of FAN MODE
A operation mode of fan installed in FAN UNIT is changed.
OFF: Normal mode (factory setting)
ON: Silent mode
1. Display the CONFIGURATION menu screen. (Refer to Section 1-12-1.)
2. Display the “FAN SILENT” using
[UP]
or
[DOWN]
key.
3. Press
[ENTER]
key. When the cursor appeared, change to ON from OFF using
[UP]
or
[DOWN]
key and press
[ENTER]
key.
4. The check screen is displayed.
Set the cursor to OK using
[RIGHT]
or
[LEFT]
key and press
[ENTER]
key.
SNMP TRAP
000.000.000.000
CHANGE
OK NG
FAN SILENT
OFF
FAN SILENT
ON
CHANGE
OK NG