Sony LF-X1, LF-X5 Operating Instructions Manual Download Page 13

Page: 13 / 160

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB04C00-WW.fm

masterpage: Right

LocationFreeTV

4-103-221-

(1)

Identifying Parts and Controls

CAPTURE button (

page 70)

Saves the currently displayed image in the
album.

POWER switch (

page 26)

Turns the monitor power on and off.

/– buttons (

page 65)

Adjusts the speaker volume.

CompactFlash card indicator (

page 124)

Orange lit: A CompactFlash card is being

accessed.

CompactFlash card slot (

page 124)

Inserts a CompactFlash card.

Stylus/stylus compartment (

page 30)

INDEX button (

page 65)

Displays the [Index] window.

Notes

• The holes on parts of the monitor are not for attaching a

carrying strap. Do not pass a string or other cord through them
by which to hang the monitor.

• Don’t cover the rear vent for a prolonged time while using the

monitor. Doing so may cause the surface of the product to
increase in temperature.

• Avoid touching hot areas of the surface of the product for long

periods, especially if you have sensitive skin.
Doing so may cause swellings or blisters as symptoms of
moderate temperature burn.

Ventilation hole
Do not block with cloth or other objects.

Battery (

page 24)

Monitor stand (

page 28)

Note that metal objects may cling to the stand
because there is a powerful magnet inside.

LAN connector
Connect a LAN cable.

Top

Rear

Continued

Summary of Contents for LF-X1, LF-X5

































































































































































Search results

Summary of Contents for LF-X1, LF-X5

Reviews:

Related manuals for LF-X1, LF-X5

Brands by name

Popular brands

Sony LF-X1, LF-X5, Operating Instructions Manual

Search results

Summary of Contents for LF-X1, LF-X5

Reviews:

Related manuals for LF-X1, LF-X5

Brands by name

Popular brands