6
System Requirements / Features and Functions
Ch
apt
er 1 Int
ro
duc
tion
System Requirements
The hardware required in order to use this recorder is as
follows.
• Monitor
1)
• Sony Network Camera
Contact your Sony dealer for details about compatible
Sony network cameras.
• USB keyboard
2)
• USB mouse
3)
• Network switch
• 1000Base-T/100Base-TX/10Base-T cable
• USB flash memory device
4)
1) This unit supports computer displays that support analog
RGB input.
2) Use a USB keyboard with a cable. Note that wireless or
infrared USB keyboards may not function with this unit. In
addition, nonstandard keys may not function.
3) Use a USB mouse with a cable. Wireless or infrared USB
mice may not function properly. Functions such as three-
button and wheel operations may also function improperly.
4) Required when exporting videos or still images.
- This unit supports USB 2.0 Mass Storage devices.
However, it does not support USB 2.0 Mass Storage HDDs
or CD/DVD drives. Do not connect mass storage devices
other than USB memory devices to the unit. Be aware that
errors may still occur when writing data to a USB 2.0 Mass
Storage memory device, depending on the type of device
used. If errors occur when writing data, use a USB flash
memory device of a different type.
Features and Functions
Front panel
A
POWER LED
Lights green when the unit is turned on.
B
HDD LED
Blinks green when the internal hard disks are accessed.
C
Infrared sensor
Receives signals from the infrared remote control unit.
D
NETWORK LED (1, 2)
Lights green when there is activity at the
corresponding LAN connector at the rear of the NSR.
E
USB connector
Use this connector to connect a USB keyboard, USB
mouse or USB flash memory to the NSR.
Rear panel
A
Security slot
Attach an anti-theft cable here.
B
USB connector
Use this connector to connect a USB keyboard, USB
mouse or USB flash memory to the NSR.
C
Monitor connector
Use this connector to connect a monitor.
Summary of Contents for Ipela NSR-S10
Page 67: ......
