48
Recording Setting
Cha
p
te
r 4
Det
a
iled Des
c
ript
ion
s
of
Set
tings
and
Win
d
o
w
s
Details of “Recording Setting”
Screen
“Recording Setting” screen
A
Camera ID
Select the camera for which the settings are being made.
Selecting a camera causes the image from that camera to
appear in the preview area on the right side of the screen.
All
Select the [All] check box to make the same settings
for all cameras at one time.
If the [All] check box is selected, images from the
cameras cannot be previewed.
B
Recording Mode
Specify the days of the week and time periods for schedule
recordings and other operations to be performed.
Continuous Recording
This records images from cameras at regular intervals
according to the set schedule.
Motion Recording
This begins recording only when a moving object is
detected within the time set for the schedule.
If this is selected, use the [Pre Event Start] and [From
Event End] fields to set the durations of the recording
(before and after the detected motion) to be stored.
No Recording
This performs no schedule recording.
Details
This displays the “Recording Mode” screen.
You can specify the days of the week and time periods
for schedule recordings and other operations to be
performed in the “Recording Mode” screen. For the
setting procedure, refer to
Combinations for Schedule Recording” (page 46)
.
Pre Event Start
Input how many seconds of the image before the
moving object was detected are to be stored.
• This setting is applied to all cameras.
• Images that precede the motion detection will be
recorded at a maximum of 1 fps (one frame per
second). In addition, the duration of the recording
that precedes motion detection may differ depending
on the resolution and bitrate settings of the camera.
See the release notes for details.
Access the following URL to download the release
notes.
http://www.sony.co.jp/Products/NSR/NSR-
S_ReleaseNote_E.pdf
From Event End
Input how many seconds of the image after the moving
object was detected are to be stored.
This setting is applied to all cameras.
C
Motion Detection
Make this setting when using the recorder’s motion
detection function rather than the camera’s motion
detection function.
When using the camera’s motion detection function, make
the setting on the camera instead.
See the release notes for cameras that can be used with the
recorder’s motion detection function. Access the following
URL to download the release notes.
http://www.sony.co.jp/Products/NSR/NSR-
S_ReleaseNote_E.pdf
Set the sensitivity at which moving objects are detected,
either by moving the slider or by inputting a numeric
value.
Higher values mean that motion is detected with greater
sensitivity.
When a camera detects a moving object, a green square
appears in the upper left corner of the monitor frame.
D
Schedule
Displays the “Schedule Setting” screen.
The “Schedule Setting” screen is used to set recording
schedules. For the setting procedure, refer to
E
Default
This restores the default settings.
E
A
B
D
C
Notes
Note
Summary of Contents for Ipela NSR-S10
Page 67: ......
