Sony ICD-SX1000 Help Manual Download Page 31

Page: 31 / 318

IC Recorder

ICD-SX733/SX734/SX1000

Troubleshooting

IC recorder operations

If you have problems

Troubleshooting

Resetting the IC recorder

Resetting the IC recorder

Noise

The recorded file is noisy and is hard to understand.
The recorded file is noisy and you want to record with less noise in your

recording.
A rustling noise is recorded.
A buzzing or humming noise is recorded.
Noise is recorded when you record a file using an external microphone (not

supplied).
Noise is heard when you listen to the file using headphones.
Noise is heard in the playback even though the noise cut function is active.

Power

The IC recorder cannot be turned on. The IC recorder does not operate, even if

you press any button.
The IC recorder cannot be turned off.
The IC recorder is powered off automatically.
The battery life is short.

Charging

You cannot charge the battery by connecting the IC recorder to your computer.
The charging indicator is not displayed or disappears in the middle of charging.
“COLD” or “HOT” is flashing instead of the battery indicator.

General operations

The IC recorder does not operate correctly.
The recording lamp and the access lamp do not light.

Recording

You cannot record a file.
Recording is interrupted.
The VOR function does not work.
When recording from other equipment, the input level is too strong or not strong

enough.
The input sound is distorted.
You cannot add a recording or an overwrite recording.

Playback

The playback volume is low.

Back Back to Top

Summary of Contents for ICD-SX1000































































































































































































































































































































Search results

Summary of Contents for ICD-SX1000

Reviews:

Related manuals for ICD-SX1000

Brands by name

Popular brands

Sony ICD-SX1000, Help Manual

Search results

Summary of Contents for ICD-SX1000

Reviews:

Related manuals for ICD-SX1000

Brands by name

Popular brands