Home
/
Sony
/
ICD-SX1000
/
Help Manual

Sony ICD-SX1000, Help Manual, Page: 101 / 318

Share

Page: 101 / 318

Sony ICD-SX1000 Help Manual Download Page 101

Folders displayed on the tab of the IC recorder

Folders for files recorded using the IC recorder (folders under the VOICE folder)
will be displayed.

Note

Even if a file is transferred directly under the VOICE folder, it will not be displayed on
the

tab of the IC recorder.

Folders displayed on the tab of the IC recorder

The following folders will be displayed among the folders forwarded from a
computer.

Folders under the MUSIC folder which contains a file (when some folders have
multiple levels, all folders will be displayed in parallel.)
Folders transferred to places other than under the MUSIC folder or the
PODCASTS folder
A folder called “No Folder” (If you transfer music files separately, those files will
be displayed under this folder.)

Folders displayed on the tab of the IC recorder

Folders for podcast files transferred from a computer will be displayed.
When you transfer podcast files from your computer to the IC recorder, use the
Sound Organizer software.

4-447-269-14(1)
© 2013 Sony Corporation

93

«
...
99
100
101
102
103
...
»

Summary of Contents for ICD-SX1000































































































































































































































































































































Reviews:

No comments