IC Recorder
ICD-SX733/SX734/SX1000
Connecting the IC recorder to your computer
To exchange files between the IC recorder and your computer, connect the IC
recorder to your computer.
1. Slide the USB DIRECT slide lever on the back of the IC recorder, and insert the
USB connector into the USB port of a running computer.
2. Make sure the IC recorder has been recognized properly.
On the Windows screen; open “My Computer” or “Computer,” and make sure
that “IC RECORDER” or “MEMORY CARD” has been recognized.
On the Mac screen; make sure that an “IC RECORDER” or “MEMORY CARD”
drive is displayed on the Finder.
The IC recorder is recognized by the computer as soon as the connection is
made. While the IC recorder is connected to the computer, “Connecting” is
displayed in the display window of the IC recorder.
If the IC recorder cannot be connected to a computer directly, use the supplied
USB connection support cable (
).
Note
The illustrations used in this Help Guide are based on the ICD-SX1000 model. These
illustrations may look different from the model you are using, however, the buttons
and controls used for operations are the same.
215
Search
