![Jam Audio HX-HP420 User Manual And Warranty Information Download Page 1](http://html2.mh-extra.com/html/jam-audio/hx-hp420/hx-hp420_user-manual-and-warranty-information_3248946001.webp)
USER GUIDE AND WARRANTY INFORMATION
www.jamaudio.com
HX-HP420
Where There’s A Jam, There’s A Party!
™
READ UP.
PARTY DOWN.
HEY. HAVE WE SEEN YOU HERE BEFORE?
PACKAGE CONTENTS
Register your headphones at www.jamaudio.com.
Information about where you bought them and how you’re
using them is like gold for the people who make these
headphones. Do them a solid, will ya?
Por manual de instrucciones e información de garantía
en español visítenos en www.jamaudio.com
There are lots of cool Jam speakers.
Check them all out at
www.jamaudio.com
Charging the headphones is so easy you’ve probably
figured it out by now, but just in case,
you’ve got two options: You can charge
it using your computer or a wall outlet.
1. The cord that came with the
headphones —the one with the USB on
one end and the Micro USB on the
other—is made to work with your computer.
2. If you want to use the wall outlet, you’ll
need to pick up a power cord with a
Micro USB the next time you’re at the
store, or use any USB AC adapter (DC 5V
+/– 0.25V rated current: >250mA), including
the one for your cell.
Plug it in and your headphones will be ready for an epic night
in no time. You should go get ready too! They need about 3
hours for 11 hours of party time.
Headphones
Packaging doubles
as carrying case
User Manual
Charging Cord
1. This is the power button, press and hold for 5 seconds to
power on. Push it to play, push it again to pause
2. Turn the music up or down (Wait, why would you turn
it down?)
3. The power cord goes here
4. Skip back a track or jam on to the next song
5. This light lets you know when Bluetooth is paired with
your headphones
6. Check out how much juice is in the battery
Like any amazing couple, this one starts with a connection
—one between your device and the headphone’s Bluetooth.
1. We know you’re probably going to think, “derp” with this
one, but we have to say it: Make sure the smartphone,
tablet or computer you want to hook up to the headphones
has Bluetooth. (There. We got that out of the way.)
2. Turn on the headphones and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
(We don’t know what you’re using. We’re not spies.)
4. Look for Jam Transit Headphones in your device’s
Bluetooth list or click YES—whatever pops up on your
device—and BAM! you’re connected.
5. Now hit PLAY on your headphones and crank it up—or
down if you’re lame.
You’re probably only going to have to do this once, unless
your device goes through a major I-just-dropped-it-in-the-
pool kind of reboot. The device and Bluetooth will find each
other every time just as long as the headphones are set to
Bluetooth and your device’s Bluetooth is, you know—on
If you’re connecting to a computer, you may have some extra
steps on that end. You’ll have to get that information from the
computer company.
Depending on your device you may be prompted to enter
a pairing code. If prompted enter “
0000
” as the code.
Press and hold the +/– button for 5 seconds to activate
pairing mode.
Note: If you turn on your Transit Headphones but haven’t
started the party, they will automatically power off after 2
minutes of unpaired inactivity.
JUST CHARGE IT
Wall adapter
not included
CONTROL YOUR DESTINY…OR AT LEAST YOUR
HEADPHONES
FEATURES:
3
5
2
6
1
4
ALLOW US TO SHED SOME LIGHT
BLUETOOTH
®
CONNECTION: IT’S A SETUP
Flashing Red
What It Looks Like
CHARGE
What It Means
Low Battery
RED (when plugged in)
Charging
LED OFF (full charged)
Ready to Party
Quick Flash BLUE/RED
Pairing Mode
Slow Flash BLUE
Connected
When friends call to interrupt your party of one—and you know
they will—answer the phone without disconnecting from your
JAM Transit. Yes, that’s right. Your headphones are a
speakerphone too. How amazing is that?
Here’s how it works:
1. Make sure your phone and headphones are connected
through Bluetooth.
HELLO? SPEAKERPHONE? YES!
2. Answering and ending a call works the same way:
simply click the PLAY/PAUSE button on your Transit.
3. If you’d rather not talk, hold down the PLAY/PAUSE
button on your Transit for three seconds to ignore the
call.
THE COOLEST PART:
The Transit knows when a call is
coming in and pauses the music before ringing. When you
hang up, the music starts where it left off—and so does
the party. If it’s you making the call, just start dialing from
your phone, and the Transit automatically does its
hands-free thing. Isn’t it refreshing to know your
headphones totally get you?
FACING IS 2.8” X 1.3”
FULL SHEET IS 5.6”W X 10.84H”