47
Registering Multiple Patients in
Advance
You can register information for multiple patients of
procedures and examinations in advance. By doing so,
you can simply select the patient from the registered
patient list on the day of the procedure or examination and
save time on preparation.
For details on registering patients from MWL, see
“Registering Patients from MWL” (page 48).
To register patients
Register patients for procedures and examinations to the
patient list.
1
Configure patient information and storage settings for
recorded data in the [Recording Preparation] screen,
select [Add to List], and then press the ENTER
button.
For details on patient information and save settings
for recorded data, see “Patient Information and Data
Storage Settings” (page 45).
The patient is added to the patient list.
2
Repeat to add any additional patients as necessary.
You can register up to 100 patients to the patient list.
When you exceed 100, existing patients will be
overwritten automatically starting with the oldest.
To recall patients
Recall patients that have been registered in advance.
1
Select [Call List] in the [Recording Preparation]
screen, and press the ENTER button.
[Call List] appears when [MWM] is set to [Not Used]
in the [System Admin Settings] screen – [DICOM
Settings] screen – [MWM Server 1] tab.
The [Patient List] screen appears.
2
Select the target patient, and press the ENTER button
to select its check box.
3
Select [Execute], and press the ENTER button.
The [Recording Preparation] screen appears again,
and the patient information will be applied in the
[Recording Preparation] screen.
To edit registered patient settings
Edit patient information and save settings for recorded
data that were registered in advance.
1
Select [Call List] in the [Recording Preparation]
screen, and press the ENTER button.
The [Patient List] screen appears.
2
Select the patient for which you want to edit settings,
and press the ENTER button to select its check box.
3
Select [Change], and press the ENTER button.
The [Change Patient List] screen appears.
4
When you finish editing settings, select [Apply] and
press the ENTER button.
The [Patient List] screen appears again.
5
Select [Execute], and press the ENTER button.
The [Recording Preparation] screen appears again.
To delete registered patients from the list
Delete patients that were registered in advance from the
list.
1
Select [Call List] in the [Recording Preparation]
screen, and press the ENTER button.
The [Patient List] screen appears.
2
Select the patient to delete, and press the ENTER
button to select its check box.
3
Select [Delete], and press the ENTER button.
4
Select [OK] when the confirmation message appears,
and press the ENTER button.
The patient entry is deleted.
5
Select [Back], and press the ENTER button.
The [Recording Preparation] screen appears again.
Tip
Tip
Summary of Contents for HVO-3300MT
Page 99: ......
