48
Registering Patients from MWL
Patient information can be obtained from MWL and
entered in the [Recording Preparation] screen.
• Patient information obtained from MWL cannot be
edited.
• When patient information is obtained from MWL, the
[Doctor] field will be grayed out.
Preparation
Set [MWM] to [Use] in the [System Admin Settings]
screen – [DICOM Settings] screen – [MWM Server 1]
tab.
For details, see “[MWM Server 1] Tab” (page 85).
To access MWL
1
Select [Access MWL] in the [Recording Preparation]
screen, and press the ENTER button.
[Access MWL] appears when [MWM] is set to [Use]
in the [System Admin Settings] screen – [DICOM
Settings] screen – [MWM Server 1] tab.
The [MWL] screen appears.
2
Select the target patient, and press the ENTER button.
• Any invalid characters or symbols in the patient ID
and patient name will be replaced and displayed as
underscores (_).
• If the number of digits is less than the value
configured for the [Patient ID Length] setting in the
[System Admin Settings] screen – [Function
Settings] screen – [Patient Info.] tab, zeros (0) will
be added according to the [Add 0 to Patient ID]
setting.
• You can also specify search conditions to search for
specific patients.
• If patients are not registered to MWL, an empty list
will be displayed.
The [Recording Preparation] screen appears again,
and the patient information that was obtained from
MWL will be applied.
To search for patients
Modalities are always used in searches. When search
conditions are specified, the search will be performed
using the specified conditions and modalities.
1
Select [Search] in the [MWL] screen, and press the
ENTER button.
The [Search] screen appears.
2
Specify the search conditions, select [Start], and press
the ENTER button.
[Appt. Date]
Select the year (last two digits), month, and day.
You can also specify a period between dates.
[Patient ID]
Enter an identification number for the patient.
[Patient Name]
Enter the patient's name.
Last name only, first name only, and last name and
first name (separated by a space) are supported for
searches. (Middle names are not supported.)
[AE Title]
Enter the AE title.
[Accession No.]
Enter the accession number.
Select [Clear] and press the ENTER button to clear all
specified search conditions.
A search for patient information matching the
specified conditions is performed, and the results are
displayed in the [MWL] screen.
Test Recording
Confirm whether images record properly.
When you perform a test recording, images record for 5
seconds and then play back automatically.
1
Select [Test Record] in the [Recording Preparation]
screen, and press the ENTER button.
2
Select [OK] when the confirmation message appears,
and press the ENTER button.
Recording starts, and a message indicating that test
recording is in progress appears throughout the
process.
Tips
Tip
Tips
Tip
Tip
Summary of Contents for HVO-3300MT
Page 99: ......
