Sony HVO-3300MT Instructions For Use Manual Download Page 22 | Manualshive

Page: 22 / 99

background image

22

o

SERVER indicator

Displays the server access status.

p

USB ports/indicators 1 and 2

Connect USB memory devices, external hard disks,
and other USB media here.
The indicators display the status of USB media
access.

Never remove USB media when these indicators are
blinking green.

Supported USB devices

• Use Sony USB media.
• The connectors do not support all USB devices.
• USB hubs and devices with built-in hubs are not

supported.

Warning

Using this unit for medical purposes

The connectors on this unit are not isolated.
Always use USB-compatible external hard drives and
USB memory devices that operate solely on the
power supplied by the unit.
Connecting a device that operates on an AC power
supply may result in an influx of leakage currents
from the connected device, which may in turn result
in electric shocks to the patient and operator.
If use of such devices cannot be avoided, be sure to
connect an isolation transformer to the power supply
of the connected device or connect an isolator
between the connection cables to isolate the power
supply, and verify that the risk of electric shock from
the system has been sufficiently reduced to levels that
conform to IEC 60601-1 standards.

q

1

(on/standby) switch/indicator

Use this switch to turn on the unit and the front panel
display. Press this switch again to turn off the unit and
enter standby mode.
The indicator indicates the following.

The indicator will turn off about 15 seconds after the

?

(on) /

a

(off) switch on the rear panel is turned off

from the standby state.

Indicator

Status

Blinking
green

The server is being accessed.

Lit orange

An error has occurred.
The recording area of the server is full.

Indicator

Status

Blinking
green

Data is being written to the USB media.

Lit green

The recording area of the USB media is
full. Delete any unnecessary recorded
data, or insert different media.

Lit orange

An error has occurred.

Note

Tip

Indicator

Status

Off

The

?

(on) /

a

(off) switch on the rear

panel is set to the

a

(off) position.

Lit orange

Standby mode. (The

?

(on) /

a

(off)

switch on the rear panel is set to the

?

(on) position.)

Lit green

The unit is turned on. (The

1

(on/

standby) switch was pressed to turn on
the unit.)

Tip

«
...
20
21
22
23
24
...
»

Summary of Contents for HVO-3300MT




































































































Reviews:

No comments

Related manuals for HVO-3300MT

Brand: Q-See Pages: 89

Brand: Q-See Pages: 65

Brand: Q-See Pages: 10

Brand: Q-See Pages: 6

Brand: Q-See Pages: 3

Brand: Q-See Pages: 5

Brand: Q-See Pages: 48

Brand: Q-See Pages: 78

Brand: Q-See Pages: 9

Brand: Q-See Pages: 3

Brand: Q-See Pages: 4

Brand: Q-See Pages: 4

Brand: Q-See Pages: 58

Brand: OPTICOM Pages: 49

MXVR1004 Series

Brand: Dahua Pages: 230

Brand: OCB Pages: 31

Brand: Securitytec Pages: 47

Brand: Arirang Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands