79
Menu Contents
Chap
te
r 7
Men
u
s
MUTING IN SRCH [> Muting]:
Select whether to suppress
the output from the TC OUT connector in search (jog/
shuttle) mode.
OFF [>> OFF]:
Do not suppress.
*
ON [>> ON]:
Suppress.
TAPE PROTECTION [Tape protct]: Settings related to tape
and video head protection
Description of settings
FROM STOP [> From
STOP]:
Set the time to
switch from stop mode to
tape protection mode.
STOP TIMER [>> STP
timer]:
Set the time to
switch from stop mode to
tape protection mode.
0.5 SEC [>>> 0.5 sec] to 5 MIN [>>> 5 min]:
Select time from
12 settings ranging from 0.5 second to 5 minutes.
Factory default setting:
*
1 MIN [>>> 1 min]
Note
If the value is set to 1 minute or more, the unit enters internal
protection mode in 1 minute, which makes start up slower.
FROM STILL [> From
STILL]:
Set the time to
switch from still search
mode to tape protection
mode. Also select the type
of tape protection mode.
STILL TIMER [>> STL
timer]:
Set the time to
switch from still search
mode to tape protection
mode.
0.5 SEC [>>> 0.5 sec] to 5 MIN [>>> 5 min]:
Select time from
12 settings ranging from 0.5 second to 5 minutes.
Factory default setting:
*
1 MIN [>>> 1 min]
Note
If the value is set to 1 minute or more, the unit enters internal
protection mode in 1 minute, which makes start up slower.
NEXT MODE [>> Next
mode]:
Select the type of
tape protection mode to
follow still search mode
when the time set with
the STILL TIMER menu
item elapses.
*
STEP FWD [>>> Step]:
The tape is advanced at 1/30 times
normal speed for about 2 seconds.
STANDBY OFF [>>> STANDBY]:
Standby off mode
Notes
• The STEP FWD setting is enabled only when “STILL TIMER”
is set to less than 1 minute.
• When used in HDV format, this setting is fixed, at STANDBY
OFF.
VIDEO CONTROL [Video]: Settings related to video
control
Description of settings
STILL MODE [> STILL mod]:
Select the image to output in
still image mode.
*
AUTO [>> Auto]:
Output field 1 or field 2 as the still image,
according to the position the tape is stopped.
FRAME [>> Frame]:
Output a full frame as the still image.
FIELD1 [>> Field 1]:
Output only field 1 as the still image.
FIELD2 [>> Field 2]:
Output only field 2 as the still image.
Note
When used in HDV format, this setting is fixed, at FIELD 1.
INT VIDEO SG [> Video SG]:
Select the test signal to be
output from the internal test signal generator. When SG is
selected using the VIDEO button in the video/audio input
selection section, the internal test signal generator
outputs the selected test signal. This signal can be
recorded.
*
75% COLOR BARS [>> 75% bar]:
75% color bar signal
100% COLOR BARS [>> 100% bar]:
100% color bar signal
BLACK BURST [>> BB]:
Black burst signal
Note
100% COLOR BARS is displayed only when the system
frequency is set to 50i.
STD/NON-STD [> STD/N-STD]:
Select the STD or NON-STD
mode in accordance with the composite video or S-video
input.
*
FORCED STD [>> STD]:
The STD mode is always used
(forced STD mode).
FORCED NON-STD [>> NON-STD]:
Use this setting when the
input video signal is unstable (forced NON-STD mode).
OUT REF SEL [> Out Ref]:
Select the reference video signal
to use.
*
REF VIDEO [>> REF]:
Use the signal input to a REF. VIDEO
IN (SD/HD) connector as the reference video signal. The
input video signal to be edited is required to be in
synchronization with the reference video signal.
INPUT VIDEO [>> INPUT]:
Use the input video signal selected
with the VIDEO button in the video/audio input selection
section.
TIME CODE [Time code]: Settings related to the timecode
generator
Description of settings
